The Client for Microsoft Networks is an essential networking software component for the Microsoft Windows family of operating systems. A Windows computer must run the Client for Microsoft Networks to remotely access files, printers and other shared network resources. These step-by-step instructions explain how to verify the client is present and, if not, how to install it.

1. Navigate to the Windows Control Panel.

2. If the computer runs Windows 2000, Windows XP or newer, locate and right click "My Network Places" in the Start Menu and choose Properties from the menu that appears. A new window titled "Network Connections" opens. In this window, open the "Local Area Connection" item.

3. If the computer runs any older version of Windows, like Windows 95 or Windows 98, locate and right-click on Network Neighborhood, then choose "Properties" from the menu that appears. Alternatively, navigate to Control Panel and open the "Network" item.

4. If the computer runs Windows 2000, Windows XP or newer, view the General tab and verify the checkbox next to Client for Microsoft Windows is unchecked. This confirms the component has not already been installed. If the network is currently active, you may not see any checkboxes in the window. In this case, click the "Properties" button one more time to reach the full General tab.

5. If the computer runs any older version of Windows, view the Configuration tab and verify the Client for Microsoft Windows does not appear in this list. This confirms the component has not already been installed.

6. If the computer runs Windows 2000, Windows XP or newer, first click the checkbox next to Client for Microsoft Windows, then click the "Install..." button to begin the process of installing this component.

7. If the computer runs any older version of Windows, simply click the "Add..." to begin the process of installing Client for Microsoft Windows.

8. For all versions of Windows, select "Client" as the type of component from the list in the new window that appears. Click the "Add..." button to continue.

9. For all versions of Windows, next choose "Microsoft" from the list of manufacturers shown on the left of the active window. Then, choose "Client for Microsoft Windows" from the list of Network Clients on the right side of the window. Click the "OK" button to continue.

10. Complete the installation by clicking the "OK" button to close the window, then proceed to reboot the computer. After the computer has restarted, Client for Microsoft Windows will be installed.

Tips:
* You will probably also need to install the TCP/IP protocol and the "File and Printer Sharing for Microsoft Networks" service to fully network a Windows computer on a typical LAN.

What You Need:
* A computer running Windows 95 or newer version of the Windows operating system

Banyak virus telah masuk ke dalam Flashdisk, dan akan menyebar melalui Autorun pada saat Flashdisk

ditancapkan ke komputer Anda.

Untuk itu ada baiknya kita menon-aktifkan fungsi autorun pada komputer kita.

Untuk Disable Autorun/Autoplay dapat menggunakan beberapa cara diantaranya : (jalankan salah satu saja)

1. Disable Autorun/Autoplay melalui registry, caranya:

- Buka Registry Editor

- Klik menu [Start | Run | pada dialog box RUN ketik regedit]

- Browse ke alamat registry berikut :

HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

HKEY_USERS.DEFAULTSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

- Kemudian klik kanan pada string NoDriveTypeAutoRun

- Alamat registry yang harus diubah agar autorun tidak aktif

- Isi value data dengan ff yang berarti fungsi Aturun/Autoply akan di matikan pada 255 drive

- Merubah value NoDriveTypeAutorun

- Klik Tombol [OK]

- Keluar dari “Registry Editor”

- Restart komputer agar perubahan ini berjalan

2. Disable Autorun/Autoplay melalui Group Policy [GPEDIT.MCS], caranya:

- Klik menu [Start]

- Klik [Run]

- Ketik GPEDIT.MSC pada kolom “RUN”

- Setelah muncul layar “Group Policy” klik folder “System” pada menu “User Configuration” dan “Computer Configuration”

- Pada kolom Settings, klik dua kali “Turn off Autoplay”Interface Group Policy “User Configuration” Interface Group Policy “Computer Configuration”

- Setelah muncul layar “Turn off Autoplay” properties, klik

tabulasi [Settings] dan pilih opsi “Enable” pada menu “Turn off

Autoplay” kemudian Pilih “All Drive” pada kolom “Turn off Autoplay on”

* Kemudian klik tombol “OK”

* Klik “Close” untuk keluar dari layar “Group Policy”

* Restart komputer

Semoga langkah – langkah diatas berguna bagi kita semua, terimakasih.

Satellite P100 & Satellite Pro P100

• Buka tutup Wi-Fi
• Lepas Mini Card Wi-Fi
• Cari dan konsletkan JP8 selama 5 detik
• Lepas konsletan dan nyalakan
• NO BOOT
• Tekan dan tahan tombol Power sampai mati lagi
• Nyalakan lagi dan password hilang

Satellite L10, L20, L30 & Satellite Pro L20

Notebook keadaan mati;

• Buka penutup Wi-Fi
• Cari dan konsletkan JP1 selama 15 detik

• Satellite L20/Pro L20 konsletkan G1

Satellite M100 & Tecra A6

Notebook dalam keadaan mati ;

• Buka penutup Memory
• Lepas Memory
• Lepas plastik hitam
• Cari konsletkan CMOS CLR1 selama 15 detik

• Posisi jumper selalu berada di bawah atau dekat dengan module memory
• Label dari jumper biasanya J1, J2, J5, J7, J9 or CMOS CLR1 (M100 & A6)

Satellite A100 & Tecra A7

1. Lepas penutup Strip
2. Remove 2 x K/B screws
3. Move K/B Unit up but don’t disconnect
4. Release & Remove Mini Card Wi-Fi Card
5. Locate & short C88 Pin 1 & 2 together
6. Power on Machine while still shorting Pin 1 & 2
7. As soon as the TOSHIBA logo appears, remove short
8. If machine boots, Password has been removed

1. Remove Memory Cover from base of machine
2. Release & remove right side Memory Module
3. Lift black plastic insulation
4. Locate & short PAD500 Pin 1 & 2 together
5. Power on machine while still shorting Pin 1 & 2
6. As soon as the TOSHIBA logo appears, remove short
7. If machine boots, password has been removed

8. Open modem & Wi-Fi card cover
9. Remove mini PCI Wi-Fi card
10. Lift up black plastic
11. Locate & short C738 Pin 1 & 2 together
12. Power on machine while still shorting Pin 1 & 2
13. As soon as the TOSHIBA logo appears, remove short
14. If machine boots, password has been removed

15. Open palm rest cover
16. Remove mini PCI Wi-Fi card
17. Lift up black plastic
18. Locate & short C5071 Pin 1 & 2 together
19. Power on machine while still shorting Pin 1 & 2
20. As soon as the TOSHIBA logo appears, remove short
21. If machine boots, password has been removed

22. Remove 2 x B12 screws from bottom of system
23. Remove strip cover
24. Remove keyboard screws 1 x B2.5 & 1 x SF4
25. Remove 1 x 4mm screw & Wi-Fi cover
26. Remove mini PCI Wi-Fi card if fitted
27. Locate & short points as shown in picture below
28. Power on machine while still shorting points
29. Short for 5 seconds
30. Nothing will appear on the screen
31. Turn system off holding down power button
32. Password is now removed

33. Open Wi-Fi slot cover
34. Lift up black plastic
35. Locate & short C561 Pin 1 & 2 together
36. Power on machine while still shorting Pin 1 & 2
37. As soon as the TOSHIBA logo appears, remove short
38. 
    
39. If machine boots, password has been removed